Delicious Beer Battered Halibut Recipe

Introduction

Enjoy the crispy, golden perfection of beer battered halibut paired with a tangy homemade tartar sauce. This dish combines delicate fish with a light, bubbly batter for a satisfying meal that’s perfect for any occasion.

A white bowl holds five pieces of golden-brown fried fish with crispy, bumpy textures on the outside. One piece is broken open, showing soft, white, flaky fish inside, covered with a creamy white sauce dotted with black specks. The bowl sits on a white marbled surface, with small lemon wedges placed around it, showing bright yellow and pale yellow colors. A small white bowl with a similar creamy sauce appears in the top right corner. photo taken with an iphone --ar 4:5 --v 7

Ingredients

  • 1 tablespoon chopped parsley leaves
  • 1 tablespoon chopped tarragon leaves
  • 1 minced shallot
  • 6 small pickles, minced
  • 1 hard-cooked egg
  • 1 teaspoon white wine vinegar
  • A small pinch of salt
  • 1 teaspoon Dijon mustard
  • 1 cup mayonnaise
  • Hot sauce to taste
  • 2 cups cake flour
  • 1 teaspoon baking soda
  • 12 oz of your favorite beer
  • 4 cups cooking oil (adjust for pan size)
  • 6 skinless halibut fillets, about 2 oz each
  • 1 teaspoon salt
  • Flaky sea salt for finishing
  • Lemon wedges for serving

Instructions

  1. Step 1: Prepare the tartar sauce by combining chopped parsley, tarragon, minced shallot, and minced pickles in a bowl. Crumble the yolk of the hard-cooked egg and dice the white, then add both to the mixture. Stir in white wine vinegar, a small pinch of salt, Dijon mustard, mayonnaise, and hot sauce to your taste. Mix well and set aside to meld flavors.
  2. Step 2: In a large bowl, combine cake flour and baking soda. Gradually pour in the beer while stirring continuously until the batter is thin and smooth with no lumps. Set aside briefly to rest.
  3. Step 3: Pour cooking oil into a deep, heavy-bottomed pan, filling no more than 2 inches from the rim. Heat the oil to 350°F (175°C). Test readiness by dropping small bits of batter into the oil; if they float and sizzle, it’s ready. Remove test pieces with a slotted spoon.
  4. Step 4: Season halibut fillets with salt on both sides to enhance flavor evenly.
  5. Step 5: Dip each fillet into the beer batter, letting excess drip off. Carefully lower the fillets halfway into the hot oil to form a crust, then fully submerge to fry until crispy and golden brown. Fry in batches if needed. Remove with a slotted spoon and drain on paper towels.
  6. Step 6: Serve the crispy halibut fillets hot with the homemade tartar sauce and lemon wedges on the side. Enjoy the delightful contrast of flavors and textures!

Tips & Variations

  • Use a light lager or pilsner beer for a crisp, mild batter flavor.
  • For a spicier tartar sauce, increase the hot sauce or add a pinch of cayenne pepper.
  • Try substituting halibut with cod or haddock for a budget-friendly alternative.
  • Ensure the oil temperature remains steady at 350°F to avoid greasy or undercooked batter.

Storage

Store any leftover fried halibut in an airtight container in the refrigerator for up to 2 days. Reheat in a hot oven or air fryer at 375°F for 5-7 minutes to crisp up the batter again. Keep tartar sauce refrigerated for up to 3 days and stir before serving.

How to Serve

In a white bowl, four pieces of golden-brown fried fish are stacked, with one piece on top showing a bite taken out, revealing the soft, white flaky fish inside; the batter is crispy and textured. Behind the bowl, there are two small white bowls, one containing lemon wedges and the other a white creamy sauce with green herbs. The scene is set on a white marbled surface with part of a gray cloth visible on the left side. Photo taken with an iphone --ar 4:5 --v 7

Serve this delicious recipe with your favorite sides.

FAQs

Can I use a different type of fish for this recipe?

Yes, firm white fish like cod, haddock, or pollock work well with beer batter and can be used as alternatives to halibut.

What if I don’t have beer on hand?

You can substitute sparkling water or club soda to create a light and bubbly batter, though the flavor will be less rich than with beer.

Print

Delicious Beer Battered Halibut Recipe

This recipe for Delicious Beer Battered Halibut features crispy, golden fried halibut fillets coated in a light and airy beer batter. Served with a zesty homemade tartar sauce that combines herbs, pickles, and a hint of heat, this dish offers a delightful balance of flavors and textures perfect for a satisfying seafood meal.

  • Author: Felix
  • Prep Time: 20 minutes
  • Cook Time: 15 minutes
  • Total Time: 35 minutes
  • Yield: 6 servings 1x
  • Category: Main Course
  • Method: Frying
  • Cuisine: American

Ingredients

Scale

Tartar Sauce

  • 1 tablespoon chopped parsley leaves
  • 1 tablespoon chopped tarragon leaves
  • 1 minced shallot
  • 6 small pickles, minced
  • 1 hard-cooked egg
  • 1 teaspoon white wine vinegar
  • A small pinch of salt
  • 1 teaspoon dijon mustard
  • 1 cup mayonnaise
  • Hot sauce to taste

Beer Batter

  • 2 cups cake flour
  • 1 teaspoon baking soda
  • 12 oz of your favorite beer

For Frying

  • 4 cups cooking oil (adjust for pan size)
  • 6 skinless halibut fillets, about 2 oz each
  • 1 teaspoon salt
  • Flaky sea salt for finishing
  • Lemon wedges for serving

Instructions

  1. Prepare the Tartar Sauce: In a bowl, combine chopped parsley, tarragon, minced shallot, and minced pickles. Crumble the yolk of a hard-boiled egg and dice the white, then add both to the mixture. Stir in white wine vinegar, a pinch of salt, Dijon mustard, mayonnaise, and hot sauce to taste. Mix well and set aside to allow flavors to meld.
  2. Mix the Beer Batter: In a large bowl, sift together the cake flour and baking soda with a fork to aerate. Gradually pour in the beer while stirring continuously until the batter is smooth and thin enough to coat the fish evenly without lumps. Set aside briefly to rest.
  3. Prepare the Oil for Frying: Fill a deep, heavy-bottomed pan with cooking oil leaving about 2 inches of space from the rim. Heat the oil to 350°F (175°C). Test readiness by dropping bits of batter into the oil; if they float and sizzle, the oil is ready. Remove test pieces with a slotted spoon.
  4. Season the Fish: Sprinkle salt evenly on both sides of each halibut fillet to enhance flavor before battering.
  5. Batter and Fry the Fish: Dip each seasoned halibut fillet into the beer batter, allowing excess batter to drip off. Carefully lower the fillets halfway into the hot oil to form a crust, then fully submerge to fry until crispy and golden brown. Fry in batches if necessary. Remove with a slotted spoon and drain on paper towels to remove excess oil.
  6. Serve: Plate the crispy halibut fillets with the homemade tartar sauce on the side. Garnish with flaky sea salt and lemon wedges. Enjoy the delightful combination of crispy fish and tangy sauce.

Notes

  • Use a light beer such as a lager or pilsner for the batter to keep it airy.
  • Ensure the oil temperature is steady at 350°F to avoid greasy fish.
  • Do not overcrowd the pan to maintain oil temperature and crispiness.
  • The tartar sauce can be made ahead and refrigerated for up to 2 days.
  • Flaky sea salt added after frying enhances the texture and flavor.
  • Serve immediately for the best crispy texture.

Keywords: beer battered halibut, fried fish recipe, homemade tartar sauce, crispy halibut, seafood fry

Did you make this recipe?

Share a photo and tag us — we can’t wait to see what you’ve made!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe rating